ASUS lists GLWS416GB3000C16DC 1G08V on the PRIME B760-PLUS D4 memory QVL at 3000 MT/s for a 2x 8GB entry. A DRAM LED or failed training does not prove the kit is defective; verify the CPU generation, installed BIOS, module placement and profile first.
Return to a documented baseline
Shut down and disconnect power before moving modules. Use the board manual's recommended DIMM positions for 2x 8GB. If an EXPO/XMP profile was enabled, return to the manufacturer's default settings. Initial training may take time; use the board manual's guidance before interrupting a first boot.
Read this exact QVL row
ASUS records vendor GeIL, part number GLWS416GB3000C16DC 1G08V, profile XMP, rated speed 3000 MT/s, QVL run speed 3000 MT/s, timing 16-18-18-36, voltage 1.35 and DIMM support 1,2. Compare every character in the kit SKU; a similar marketing name is not the same tested part.
Check CPU and BIOS scope
The extracted QVL row did not capture which CPU-generation filter was active. Reopen the current ASUS QVL, choose the installed processor generation, and confirm that the exact row remains present. Record the BIOS installed on your board. The kit maker's current JEDEC default and production revision also need its own data sheet.
Isolate the remaining cause safely
If the system still fails at documented defaults, follow the board manual's one-module diagnostic sequence and record which slot and module were used. Do not mix two separate kits or assume a two-DIMM QVL entry guarantees four-DIMM training. Send the board maker or kit maker the board revision, CPU, BIOS and complete SKU when requesting support.
Sources & verification
Manufacturer pages were checked on 2026-10-29. Recheck the current page before purchase.
- ASUS PRIME B760-PLUS D4 memory QVL Checked 2026-10-29
- ASUS PRIME B760-PLUS D4 technical specifications Checked 2026-10-29
- ASUS PRIME B760-PLUS D4 CPU support list Checked 2026-10-29
- ASUS PRIME B760-PLUS D4 BIOS release history Checked 2026-10-29
Found an error? Request a correction.