As an Amazon Associate I earn from qualifying purchases.
Sandisk's official page lists exact SKU SDSP81400TAH-000E0 at 4TB. The checked variant specification gives NVMe, PCIe 4.0 x4 and M.2 2280. Use the current manufacturer data sheet and the selected board slot as the final reference.
Manufacturer listing and known fields
| Exact SKU | SDSP81400TAH-000E0 |
|---|---|
| Capacity | 4TB |
| Protocol | NVMe |
| PCIe interface | 4.0 x4 |
| Physical form | M.2 2280 |
| Heatsink | Not verified |
What the selected M.2 slot must support
The documented NVMe interface and M.2 2280 length can be compared with a specific board slot. This is a specification comparison, not a hands-on detection or boot test.
For an M.2 drive, check whether the board slot is CPU-connected, shared with a PCIe/SATA port or restricted by the selected processor. The official board manual governs those conditions.
Physical and firmware checks
Heatsink clearance, mounting hardware, firmware detection and boot mode are separate from a nominal connector match. Review the exact drive and board documentation before purchase.
Compare this SKU with a board slot
Explore parts after verifying the specifications
Search results can include products that do not match your exact board, revision or slot. Check the SKU and manufacturer documentation before ordering.
(paid link)
Search SDSP81400TAH-000E0 on AmazonSources & verification
Manufacturer pages were checked on 2026-10-29. Recheck the current page before purchase.
- Sandisk official listing for SDSP81400TAH-000E0 Checked 2026-10-29
Found an error? Request a correction.